Student presented at a conference 学生の学会発表 Aerosol Deposition on Water Surfaces: Using Soot Particles

on

第41回エアロゾル科学・技術研究討論会(2024/8/20)The 41st Annual Conference of the Japan Association of Aerosol Science and Technology

This study investigated the deposition process of aerosols onto water surfaces using “fresh” soot particles generated from candle combustion as a model aerosol. Soot particles were introduced into water-filled rectangular and cylindrical chambers to examine their deposition behavior. Results showed that deposition velocity and amounts were larger for lower water temperatures compared to higher temperatures. This difference is primarily attributed to the temperature gradient (thermophoresis) between the aerosol and the deposition surface. Additionally, the introduction of forced convection using an exhaust pump influenced particle deposition onto the water surface. 本研究では、水面上へのエアロゾルの沈着プロセスを調べた。モデルエアロゾルとして、ろうそくの燃焼から生成された「新鮮な」すす粒子を使用した。すす粒子を水を満たした長方形および円筒形のチャンバーに導入し、水面への沈着挙動を調べた。結果は、水温が低いほど沈着速度と沈着量が大きいことを示した。この差異は主に、エアロゾルと沈着表面間の温度勾配(熱泳動)に起因する。さらに、排気ポンプを使用して強制対流を導入したところ、水面への粒子沈着に影響を与えることが分かった。