Other “intro” of papers from our lab >> /tag/paper/
* Physical treatment on the biocomposite increases the surface roughness.
* Single bond COOH network on the treated biocomposite promotes the particle deposition.
* The network reduces the particles repulsion during the deposition process.
# Bio-composite（バイオコンポジット）is a composite material formed by a matrix (resin) and a reinforcement of natural fibers.生物由来素材を組み合わせて作った素材
A nanostructure derived from TiO2 particle deposition onto a biocomposite surface derived from coir dust (ココナッツ廃棄物) was developed to control degradation. The coir dust was obtained from coconut kernel waste (ココナツ殻の廃棄物) and underwent drying treatment before it was mixed with polypropylene (PP) as the substrate. The TiO2 suspension was spray dried onto a hot-pressed substrate (biocomposite) with a surface roughness between 0.23 and 1.57 μm.
Advanced Powder Technology (詳細・・・)
Volume 26, Issue 2, March 2015, Pages 362–367
Deposition of nanostructures derived from electrostatically stabilised TiO2 aqueous suspension onto a biocomposite
M. Nazli Naim,
Atiqah Raihan Jaafar,
Noor Fitrah Abu Bakar,
Azhari Samsu Baharuddin,
Roseliza Kadir Basha,
I. Wuled Lenggoro.
a Faculty of Engineering, Department of Process and Food Engineering, Universiti Putra Malaysia, Serdang, Selangor 43400, Malaysia
b Faculty of Chemical Engineering, Universiti Teknologi MARA, 40450 Shah Alam, Malaysia
c Graduate School of Bio-Applications and Systems Engineering, and Department of Chemical Engineering, Tokyo University of Agriculture and Technology, 2-24-16 Nakacho, Koganei, Tokyo 184-8588, Japan